These handlebars will give you the style and look that’s in demand at a reasonable price without sacrificing the Cruiser Performance quality and engineering.  Polished welds, Smooth bends that flow and just the right pullback to make this handlebar a premier product.  Don’t settle for anything less!  Available in Chrome or Black Powder Coated with "Cardinal" Brand Gloss Black Powder Coating for high luster and quality shine.

In our commitment to detail, we make sure welds are polished all the way around to give that ultra clean look. All Chrome and Black Powder Coating is inspected prior to shipping to ensure high luster and endurance.

* CP-CPH-0900: 6 inch Risers with 6 inches of Pullback (usually works with stock cables) Note: not for VT1100 Spirit, V-Star 1100 and Warrior due to clearance)
* CP-CPH-0925: 8 inch Risers with 8 inches of Pullback (may need longer cables)
* Top Handle Bar is- 33 inches wide, 1.00" diameter (stock)

Known to fit -
Honda:
  VT750 ACE (98-02)
  VT750 Aero (04+)
  VT750C2/DC Spirit (01+)
  VT1100 Sabre/ACE/Spirit (all years)
  VT750 Magna (94-04)
Yamaha
   Road Star, Silverado, Midnight star (99+)
   V-Star 6501100 Classic/Custom (98+)
   Royal Star (96-01)
   Warrior (02+)
Suzuki
   Volusia 800/C50 (01+)
   Intruder 1500LC/C90 (99+)
   Intruder 800/S50 (94+)

These handlebars will give you the style and look that’s in demand at a reasonable price without sacrificing the Cruiser Performance quality and engineering. These are the only 1.25 inch T-Bars on the market designed specifically for your Cruiser. Engineered to fit with your stock cables, controls and grips, these truly are a bolt on improvement.Polished welds, Smooth bends that flow and just the right pullback to make this handlebar a premier product.  Don’t settle for anything less!  Available in Chrome or Black Powder Coated with "Cardinal" Brand Gloss Black Powder Coating for high luster and quality shine.

In our commitment to detail, we make sure welds are polished all the way around to give that ultra clean look. Welds and bends are done with automated robots to insure precision quality. All Chrome and Black Powder Coating is inspected prior to shipping to ensure high luster and endurance.

* CP-CPH-1000: 6 inch Risers with 6 inches of Pullback (usually works with stock cables) Note: not for VT1100 Spirit, V-Star 1100 and Warrior due to clearance)
* CP-CPH-1025: 8 inch Risers with 8 inches of Pullback (may need longer cables)
* Top Handle Bar is- 33 inches wide, 1.25" diameter (tapers to stock diameter where controls and grips mount)

Known to fit -
Honda:
  VT750 ACE (98-02)
  VT750 Aero (04+)
  VT750C2/DC Spirit (01+)
  VT1100 Sabre/ACE (all years - not for VT1100 Spirit due to tank clearance issues)
  VT750 Magna (94-04)
Yamaha
   Road Star, Silverado, Midnight star (99+)
   V-Star 6501100 Classic/Custom (98+)
   Royal Star (96-01)
   Warrior (02+)
Suzuki
   Volusia 800/C50 (01+)
   Intruder 1500LC/C90 (99+)
   Intruder 800/S50 (94+)

 Want a really insane style drag bar that is clean and thick? These are the fattest most Aggressive T-bars on the Metric market! The risers are welded in and are unsurpassed in quality and construction. At 1.5 inches in diameter, these bars will get your bike added respect when you roll up at bike night. Stock and aftermarket controls will bolt right on. Stock control cables work and there is no drilling of your triple tree required. The bars are also pre-drilled for internal wiring. Don’t settle for anything less!  Available in Chrome or Black Powder Coated with "Cardinal" Brand Gloss Black Powder Coating for high luster and quality shine.

In our commitment to detail, we make sure welds are polished all the way around to give that ultra clean look. Welds and bends are done with automated robots to insure precision quality. All Chrome and Black Powder Coating is inspected prior to shipping to ensure high luster and endurance.

* CP-CPH-1100: 6 inch Risers with 6 inches of Pullback (usually works with stock cables) Note: not for VT1100 Spirit, V-Star 1100 and Warrior due to clearance)
* CP-CPH-1125: 8 inch Risers with 8 inches of Pullback (may need longer cables)
* Top Handle Bar is 33 inches wide, 1.50" diameter (tapers to stock diameter where controls and grips mount)

Known to fit -
Honda:
  VT750 ACE (98-02)
  VT750 Aero (04+)
  VT750C2/DC Spirit (01+)
  VT1100 Sabre/ACE/Spirit (all years)
  VT750 Magna (94-04)
Yamaha:
   Road Star, Silverado, Midnight star (99+)
   V-Star 6501100 Classic/Custom (98+)
   Royal Star (96-01)
   Warrior (02+)
Suzuki
   Volusia 800/C50 (01+)
   Intruder 1500LC/C90 (99+)
   Intruder 800/S50 (94+)

 Want a really insane style drag bar that is clean and thick? These are the fattest most Aggressive T-bars on the Metric market! The risers are welded in and are unsurpassed in quality and construction. At 1.5 inches in diameterand 13 inches of pullback, these dual-walled bars will get your bike added respect when you roll up at bike night. Stock and aftermarket controls will bolt right on- there is no drilling of your triple tree required. Longer cables and lines will be needed. The bars are also pre-drilled for internal wiring. Don’t settle for anything less!  Available in Chrome or Black Powder Coated with "Cardinal" Brand Gloss Black Powder Coating for high luster and quality shine.

In our commitment to detail, we make sure welds are polished all the way around to give that ultra clean look. Welds and bends are done with automated robots to insure precision quality. All Chrome and Black Powder Coating is inspected prior to shipping to ensure high luster and endurance.

* CP-CPH-1120: 8 inch Risers with 13 inches of Pullback (will need longer cables)
* Top Handle Bar is 33 inches wide, 1.50" diameter (tapers to stock diameter where controls and grips mount)

Known to fit -
Honda:
  VT750 ACE (98-02)
  VT750 Aero (04+)
  VT750C2/DC Spirit (01+)
  VT1100 Sabre/ACE/Spirit (all years)
  VT750 Magna (94-04)
Yamaha:
   Road Star, Silverado, Midnight star (99+)
   V-Star 6501100 Classic/Custom (98+)
   Royal Star (96-01)
   Warrior (02+)
Suzuki
   Volusia 800/C50 (01+)
   Intruder 1500LC/C90 (99+)
   Intruder 800/S50 (94+)

• A lot of looks without a lot of hassle
• Cut from billet aluminum and chromed to add a custom touch to the handlebar area
• Available in fluted, scalloped and swept styles
• Easy quick installation
  

• Designed as a drop-in replacement to upgrade OEM ball-type bearings to taper bearings (where ball-type bearings are used by the OEM)
• Designed as a replacement taper bearing seat (where taper bearings are original equipment)
• Kits come complete with both upper and lower taper bearing cups and cones and seals (both top and bottom seals are included in most kits, if applicable)
• Tapered roller bearings decrease maintenance along with less wear and longer life

Here are some great bars at a great price. Bars are 1" in diameter and finished in chrome, and are available in standard or with dimples for wiring. Here are some great bars at a great price. Bars are 1" in diameter and finished in chrome, and are available in standard or with dimples for wiring.

Here are some great bars at a great price. Bars are 1" in diameter, finished in chrome, and are available in standard or with dimples for wiring. Bars pull back closer to the rider with a low rise for excellent comfort. Here are some great bars at a great price. Bars are 1" in diameter, finished in chrome, and are available in standard or with dimples for wiring. Bars pull back closer to the rider with a low rise for excellent comfort.

The sculpted styling of this handlebar brings out the classic heritage of today’s cruisers. The specially-designed bends, length and pullback relieve the stress and pain most riders suffer in the neck, shoulders and back, while the thick-walled tubing reduces vibration to the riders hands. As well, these bars provide additional leverage and a lower center of gravity that makes the bike easier to control and feel like it has lost a couple hundred pounds. Installs easily on most bikes using all stock lines and controls.

Dimensions: Dia. 1", Width 36", Rise 4 1/2", Pullback 13 1/2"

Known fitment:
Kawasaki: Vulcan 1500/1600 Classic, 1500 Drifter, 1500 Nomad, Vulcan 900 Classic
Suzuki: Volusia/C50 1500LC/C90
Yamaha: Road Star, Royal Star (99-01), Venture, V-Star 1100 Classic/Custom, V-Star 1300, V-Star 650 Classic/Custom

Get retro with these '40s style handlebars. Constructed with 1" diameter steel tubing with knurled center. Highly polished, brilliantly chrome plated. Made in the U.S.A.

Bar rise is 16", a height we engineered, evaluated, tested and proved was the best choice for today’s cruisers and as the best possible fit for most riders.

Each handlebar is bored and dimpled to allow for internal wiring. Requires longer control cables, but accepts all stock 1" type controls. Fits bikes with riser spacing of 3-1/2" to 4". Works with most stock and aftermarket risers. It is recommended that you check your local codes for handlebar height to be sure these bars are legal in your area.

Dimensions: Diameter: 1-1/4", Width: 37", Rise: 17", Pullback: 12", Center Width: 10"

Known Bike Fitment: (Honda & Suzuki models require minor drilling)

• Honda: Magna, Shadow Ace/Sabre/Spirit
• Kawasaki: Mean Streak, 1500 Drifter, 1500 Nomad, Vulcan 1600 Classic, Vulcan 2000, Vulcan 90
• Suzuki: Intruder 1400/S83, 800/S50, Volusia/C50, 1500LC/C90, Marauder 1600/M95
• Yamaha: Road Star 1600/1700, Royal Star 96-01, V-Star 1100 Custom/Classic, V-Star 650 Custom/Classic

35 degree bend, chrome.

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 30", Center Width - 11", Rise - 0", Pullback - 0"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 36", Center Width - 8.5", Rise - 2.875", Pullback - 14.75"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 36.5", Center Width - 9", Rise - 2.375", Pullback - 8"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 35", Center Width - 9.5", Rise - 3.875", Pullback - 11"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 30.5", Center Width - 8", Rise - 0", Pullback - 6.25"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 32.25", Center Width - 9.5", Rise - 4.5", Pullback - 14.75"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 34", Center Width - 10", Rise - 4.75", Pullback - 12.5"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter  Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 37.5", Center Width - 9", Rise - 9", Pullback - 10" Available in 8.5", 10", 12", 14", 16", and 18" rises. (note: check with local laws for legality in your area)