• Chrome-plated polished steel
• Dimpled and drilled for internal wiring
• Original Ness styles from the '70s

• Chrome-plated polished steel
• Dimpled and drilled for internal wiring
• Original Ness styles from the '70s

• Kit contains high-quality bushings, chrome handlebar retainer washers and steel inner sleeves
• Fits models with unthreaded risers from 73-03

Old School Original 1 1/4" Z-Bars

• 1 1/4" Diameter high-grade steel tubing
• Designed for early and late model HD stock 1" controls
• Mounting section is 1" in diameter
• Dimpled and drilled for internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width: 31.5", Center Width: 5 1/8" Usable, Height: 2.75", Pullback: 3"   Note: For 3.5" centers.

Precision CNC machined from billet aluminum with a brilliant chrome finish, this sleek handlebar clamp replaces the stock riser caps on your Deuce. Better stabilization of your stock bar, and increased safety when mounting aftermarket 1 1/4" handlebars, this clamps adds style and functionality to your ride.

Custom, 1 1/4" thick with smooth polished riser welds and pre-drilled for internal wiring. They are 30.5" wide with superior bends for comfort and control. pullback risers are spaced 3.5" on center for standard triple trees, threaded 1/2" x 13. They clear the tank and dash on all stock model bikes and work with the stock cables, brake line and wiring on most models.

The perfect custom replacement for the stock buckhorns. Chubby 8.5" Baby Apes mantain the stock height, but put your hands & wrists in the perfect position for comfort and control. they work with stock cables, brake lines, and wiring on most models.

Chubby. Dresser FLSTC/FLSTF Bars are the ultimate combination of comfort, control and style on Heritage, Fatboy and FLH models. Chubby. KnucKles are super low and 36.5" wide, super cool look! Get Thick With Wild 1 Chubbys. All Models Are, 1 1/4" Thick, Pre Drilled For Internal Wires and Show Chrome Plated. Manufactured in the USA and easily installed on all models early to present. Use your stock controls, cables, brake line & wiring.

Here are some great bars at a great price. Bars are 1" in diameter and finished in chrome, and are available in standard or with dimples for wiring. Here are some great bars at a great price. Bars are 1" in diameter and finished in chrome, and are available in standard or with dimples for wiring.

Here are some great bars at a great price. Bars are 1" in diameter, finished in chrome, and are available in standard or with dimples for wiring. Bars pull back closer to the rider with a low rise for excellent comfort. Here are some great bars at a great price. Bars are 1" in diameter, finished in chrome, and are available in standard or with dimples for wiring. Bars pull back closer to the rider with a low rise for excellent comfort.

• 1 1/4" Diameter high-grade steel tubing
• Designed for early and late model HD stock 1" controls
• Mounting section is 1" in diameter
• Dimpled and drilled for internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished

Dimensions 1-1/4 D x 33 W x 7-1/2 R x 7-1/2" PB 

Bike Fitment:
   Harley Davidson: Dyna, Softail, Sportster
   Kawasaki: Mean Streak, Vulcan 1500/1600 Classic, 1500 Nomad, Vulcan 2000, Vulcan 800 Classic, Vulcan 900

• Works with all stock cables, lines and controls and allows for external wiring
• Direct replacement for stock bars with 1” riser clamp diameter
• 13 inches of pullback, reducing reach and improving back position
• Lower grip point, relaxes shoulders for added comfort
• Improved bar length increases leverage making the bike easier to steer
• Realigned wrist position reduces or eliminates hand numbness
• Does not interfere with stock mirrors
• Diameter: 1-1/4", Width: 38”, Rise: 5", Pullback: 13”. Diamond-knurled for OEM risers on 3-1/2" centers to prevent slippage
• BA-7390-02 is for "Fly-by-wire" models - fits 2008+ FL touring models (FLH, FLT, FLSTC)
• Works with FL fairings
• Made in the USA
  
  Bike Fitment: Harley Davidson Touring- also Dyna, Softail and Sportster and other models

• 1 1/4" Diameter high-grade steel tubing
• Designed for early and late model HD stock 1" controls (not for TBW - Throttle-by-wire)
• Mounting section is 1" in diameter
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width: 40", Center Width: 12", Pullback: 8", Available in 12", 14", 16", 18", and 20" rises. (note: check with local laws for legality in your area)

LA Choppers FL 1 1/4" Ape Hangers are specially designed for "batwing" fairings providing unique low-profile bends that provide proper clearances without sacrificing the look of traditional Ape Hangers. These bars are for Harley-Davidson Touring models prior to 2008 (those without Throttle-by-wire). Stepped down to accept 1" risers and controls.

For TBW models, see BA-LA-7320 bars.

Bars measure 40.5" Wide, 14" Center Width, with 10" Pullback. Available in 12", 14", 16", 18", and 20" rises. (note: check with local laws for legality in your area)

LA Choppers FL 1 14" Ape Hangers are specially designed for "batwing" fairings providing unique low-profile bends that provide proper clearances without sacrificing the look of traditional Ape Hangers. These bars are made specifically for 2008+ Harley-Davidson Touring models utilizing Throttle-by-wire (TBW). Stepped down to accept 1" risers and controls.

For Non-TBW models, see BA-LA-7315 bars.

Bars measure 40.5" Wide, 14" Center Width, with 10" Pullback. Available in 12", 14", 16", 18", and 20" rises. (note: check with local laws for legality in your area)

Bar rise is 16", a height we engineered, evaluated, tested and proved was the best choice for today’s cruisers and as the best possible fit for most riders.

Each handlebar is bored and dimpled to allow for internal wiring. Requires longer control cables, but accepts all stock 1" type controls. Fits bikes with riser spacing of 3-1/2" to 4". Works with most stock and aftermarket risers. It is recommended that you check your local codes for handlebar height to be sure these bars are legal in your area.

Dimensions: Diameter: 1-1/4", Width: 37", Rise: 17", Pullback: 12", Center Width: 10"

Known Bike Fitment: (Honda & Suzuki models require minor drilling)

• Honda: Magna, Shadow Ace/Sabre/Spirit
• Kawasaki: Mean Streak, 1500 Drifter, 1500 Nomad, Vulcan 1600 Classic, Vulcan 2000, Vulcan 90
• Suzuki: Intruder 1400/S83, 800/S50, Volusia/C50, 1500LC/C90, Marauder 1600/M95
• Yamaha: Road Star 1600/1700, Royal Star 96-01, V-Star 1100 Custom/Classic, V-Star 650 Custom/Classic

35 degree bend, chrome.

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 30", Center Width - 11", Rise - 0", Pullback - 0"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 36", Center Width - 8.5", Rise - 2.875", Pullback - 14.75"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 36.5", Center Width - 9", Rise - 2.375", Pullback - 8"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 35", Center Width - 9.5", Rise - 3.875", Pullback - 11"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 30.5", Center Width - 8", Rise - 0", Pullback - 6.25"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 32.25", Center Width - 9.5", Rise - 4.5", Pullback - 14.75"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 34", Center Width - 10", Rise - 4.75", Pullback - 12.5"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter  Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 37.5", Center Width - 9", Rise - 9", Pullback - 10" Available in 8.5", 10", 12", 14", 16", and 18" rises. (note: check with local laws for legality in your area)