Dimensions 1-1/4 D x 33 W x 7-1/2 R x 7-1/2" PB 

Bike Fitment:
   Harley Davidson: Dyna, Softail, Sportster
   Kawasaki: Mean Streak, Vulcan 1500/1600 Classic, 1500 Nomad, Vulcan 2000, Vulcan 800 Classic, Vulcan 900

Here are some great bars at a great price. Bars are 1" in diameter and finished in chrome, and are available in standard or with dimples for wiring. Here are some great bars at a great price. Bars are 1" in diameter and finished in chrome, and are available in standard or with dimples for wiring.

Here are some great bars at a great price. Bars are 1" in diameter, finished in chrome, and are available in standard or with dimples for wiring. Bars pull back closer to the rider with a low rise for excellent comfort. Here are some great bars at a great price. Bars are 1" in diameter, finished in chrome, and are available in standard or with dimples for wiring. Bars pull back closer to the rider with a low rise for excellent comfort.

The sculpted styling of this handlebar brings out the classic heritage of today’s cruisers. The specially-designed bends, length and pullback relieve the stress and pain most riders suffer in the neck, shoulders and back, while the thick-walled tubing reduces vibration to the riders hands. As well, these bars provide additional leverage and a lower center of gravity that makes the bike easier to control and feel like it has lost a couple hundred pounds. Installs easily on most bikes using all stock lines and controls.

Dimensions: Dia. 1", Width 36", Rise 4 1/2", Pullback 13 1/2"

Known fitment:
Kawasaki: Vulcan 1500/1600 Classic, 1500 Drifter, 1500 Nomad, Vulcan 900 Classic
Suzuki: Volusia/C50 1500LC/C90
Yamaha: Road Star, Royal Star (99-01), Venture, V-Star 1100 Classic/Custom, V-Star 1300, V-Star 650 Classic/Custom

Stud kits allow most Harley-style risers with standard ½” x 13 threads to be converted to mount on Honda, Yamaha, Suzuki and Kawasaki cruisers. All studs have one end that is ½”-13 x ¾” that threads into the riser’s base. The other end of the stud and the shoulder are machined to fit the triple tree of the different manufacturers.

• Includes 2 studs, 2 aircraft nuts, 2 washers and 2 jam nuts
• Studs thread into risers allowing mounting to metric triple trees
• Installation is easy and instructions are included.

Riser bolt kits have the following dimensions - check your bike for correct fitment prior to purchase:
Yamaha and some Suzuki models: (12mm x 20mm stud w/14mm D x 37mm shoulder)
Honda models: (12mm x 30mm stud w/10mm D x 11mm shoulder)
Kawasaki models: (10mm x 30mm stud w/10mm D x 11mm shoulder)

• 1 1/4" Diameter high-grade steel tubing
• Designed for early and late model HD stock 1" controls (not for TBW - Throttle-by-wire)
• Mounting section is 1" in diameter
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width: 40", Center Width: 12", Pullback: 8", Available in 12", 14", 16", 18", and 20" rises. (note: check with local laws for legality in your area)

Stud kits allow most Harley-style risers with standard ½” x 13 threads to be converted to mount on Honda, Yamaha, Suzuki and Kawasaki cruisers. All studs have one end that is ½”-13 x ¾” that threads into the riser’s base. The other end of the stud and the shoulder are machined to fit the triple tree of the different manufacturers.

• Includes 2 studs, 2 aircraft nuts, 2 washers and 2 jam nuts
• Studs thread into risers allowing mounting to metric triple trees
• Installation is easy and instructions are included.

Riser bolt kits have the following dimensions - check your bike for correct fitment prior to purchase:
Yamaha and some Suzuki models: (12mm x 20mm stud w/14mm D x 37mm shoulder)
Honda models: (12mm x 30mm stud w/10mm D x 11mm shoulder)
Kawasaki models: (10mm x 30mm stud w/10mm D x 11mm shoulder)

Cruiser Performance Kawasaki Handlebars are a perfect blend of a low drag style with an aggressive feel.  The quality of our T-bars is unsurpassed, built from 120 dual walled American made steel and specialized chrome (not production) you can be sure that you are getting the best in the industry.  Cruiser Performance does not follow the rules on these bars; we manufactured the top drag at 33 inches wide for ultimate stability, control and riding position. Don’t be the only rider without them, get them now and you will not be disappointed. Available in Chrome or Black Powder Coated with "Cardinal" Brand Gloss Black Powder Coating for high luster and quality shine.

In our commitment to detail, we make sure welds are polished all the way around to give that ultra clean look. Welds and bends are done with automated robots to insure precision quality. All Chrome and Black Powder Coating is inspected prior to shipping to ensure high luster and endurance.

* CP-CPH-1400: 6 inch Risers with 6 inches of Pullback (usually works with stock cables)
* CP-CPH-1425: 8 inch Risers with 8 inches of Pullback (usually works with stock cables, but may need longer cables)
* Top Handle Bar is- 33 inches wide, 1.25" diameter (tapers to stock diameter where controls and grips mount)

Known to fit -
Kawasaki:
  Vulcan 750
  Vulcan 800/1500/1600 Classic
  Drifter 800/1500
  Mean Streak
  Nomad

Finally, a handlebar worthy enough for your Kawasaki cruiser! These are the biggest and most aggressive T-Bars on the Market! They are low, mean, and pissed off.  To top off this great design, these are constructed with 1.50 diameter tubing, making the front end of your bike symmetrical. Specially designed from the ground up for your Kawasaki, these are a direct bolt on. No need to replace your cables, grips or controls. Available in Chrome or Black Powder Coated with "Cardinal" Brand Gloss Black Powder Coating for high luster and quality shine.

In our commitment to detail, we make sure welds are polished all the way around to give that ultra clean look. Welds and bends are done with automated robots to insure precision quality. All Chrome and Black Powder Coating is inspected prior to shipping to ensure high luster and endurance.

* CP-CPH-1450: 6 inch Risers with 6 inches of Pullback (usually works with stock cables)
* CP-CPH-1475: 8 inch Risers with 8 inches of Pullback (usually works with stock cables, but may need longer cables)
* Top Handle Bar is 33 inches wide, 1.50" diameter (tapers to stock diameter where controls and grips mount)

Known to fit -
Kawasaki:
  Vulcan 750
  Vulcan 800/1500/1600 Classic
  Drifter 800/1500
  Mean Streak
  Nomad

Get retro with these '40s style handlebars. Constructed with 1" diameter steel tubing with knurled center. Highly polished, brilliantly chrome plated. Made in the U.S.A.

• Fat 1-1/4" bars
• Beautiful chrome finish
• Affordably priced
• May require longer cables on some bikes
• Width 35", Pullback 11", Height 5.5", Center 12"
  

Bar rise is 16", a height we engineered, evaluated, tested and proved was the best choice for today’s cruisers and as the best possible fit for most riders.

Each handlebar is bored and dimpled to allow for internal wiring. Requires longer control cables, but accepts all stock 1" type controls. Fits bikes with riser spacing of 3-1/2" to 4". Works with most stock and aftermarket risers. It is recommended that you check your local codes for handlebar height to be sure these bars are legal in your area.

Dimensions: Diameter: 1-1/4", Width: 37", Rise: 17", Pullback: 12", Center Width: 10"

Known Bike Fitment: (Honda & Suzuki models require minor drilling)

• Honda: Magna, Shadow Ace/Sabre/Spirit
• Kawasaki: Mean Streak, 1500 Drifter, 1500 Nomad, Vulcan 1600 Classic, Vulcan 2000, Vulcan 90
• Suzuki: Intruder 1400/S83, 800/S50, Volusia/C50, 1500LC/C90, Marauder 1600/M95
• Yamaha: Road Star 1600/1700, Royal Star 96-01, V-Star 1100 Custom/Classic, V-Star 650 Custom/Classic

35 degree bend, chrome.

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 30", Center Width - 11", Rise - 0", Pullback - 0"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 36", Center Width - 8.5", Rise - 2.875", Pullback - 14.75"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 36.5", Center Width - 9", Rise - 2.375", Pullback - 8"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 35", Center Width - 9.5", Rise - 3.875", Pullback - 11"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 30.5", Center Width - 8", Rise - 0", Pullback - 6.25"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 32.25", Center Width - 9.5", Rise - 4.5", Pullback - 14.75"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter   Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 34", Center Width - 10", Rise - 4.75", Pullback - 12.5"

• 1 1/4" Diameter high-grade steel tubing
• Designed for stock 1" controls
• Center section is 1 1/4" diameter  Must Use 1 1/4" Risers for Mounting
• Dimpled and drilled for external or internal wiring
• Can be used with hydraulic clutch setups
• Hand polished and beautifully chrome finished
• Width - 37.5", Center Width - 9", Rise - 9", Pullback - 10" Available in 8.5", 10", 12", 14", 16", and 18" rises. (note: check with local laws for legality in your area)